2. The clutch shaft head nut locking plate is locked or damaged, so that the nut loosens out of the mouth, causing the clutch assembly to move outward in the axial direction, destroying the normal clearance between the release bearing and the release bar, and causing the clutch to be separated completely. At this point, the damaged lock should be replaced, tighten the nut and lock the lock.
3. The gap between the separating rod and the separating bearing is too large, and the clearance between the three separating levers and the separating bearing is inconsistent, resulting in incomplete separation of the clutch. At this time, the clearance between the release lever and the release bearing should be adjusted to 0.4 to 0.5 mm, and the three release levers should be kept in line with the clearance of the release bearing.
4. The free stroke of the clutch disengagement handle is too large, resulting in incomplete clutch disengagement. In this case, the disengagement handle must be adjusted. The method is: the clutch handle is placed in the "closed" position, the handle pull rod is adjusted, and the separation lever clearance is adjusted to 0.4 to 0.5 mm.
5. The separation claws are worn badly, and there is no guarantee that there should be a stroke during separation, resulting in incomplete separation. The separation claw should be replaced at this time.
6. The driven plate is excessively worn and the rivets are loosened. Foreign matter exists between the friction plate and the driven plate, which reduces the stroke when the driven plate is separated, resulting in incomplete separation. In this case, the rivets should be riveted or replaced.
7. The driven plate is reversed. When the clutch is disengaged, there is no axial movement of the driven plate. The driven disk should be installed correctly.
8. The thickness of the new driven plate replaced exceeds the specification, resulting in reduced separation stroke, insufficient axial movement, and incomplete clutch separation. In this case, replace the driven plate whose thickness meets the requirements.
9. The spline in the driven plate does not fit well with the clutch shaft spline. The axial movement of the driven plate is difficult and the clutch is not completely separated. The shaft spline should be trimmed or replaced at this time.
10. The clutch bearing is excessively worn and generates axial turbulence, which causes the clearance between the release lever and the release bearing to change, causing the clutch to be separated incompletely. In this case, replace the bearing.
Low Pesticide Goji Berry, also called EU standard Goji Berry. Ningxia goji berry enjoys a great fame around the global due to its high quality standard; meanwhile, it is the only protected product of geographical identity in China, goji berry has a great popularity describes as "goji berry of the world is in China, goji berry of China is in Ningxia and Ningxia's goji berry is the best".
1.Type Genus: Multi-branched deciduous shrub of Solanaceae Lycium
2.Another name: wolfberry, red berry, red pendant, blood berry, eye-brighten berry, Tzi-fruit, hoof berry, milk berry, immortality grass, sky-essence grass, wolfberry
3.Biology Character: illumination preferable, saline-alkali tolerance, fertilizer tolerance, drought-resistant, water stain should be sustained.
4.Medicinal Parts: goji berry/ goji berry leaves, goji berry roots. 
Low Pesticide Goji Berry
Low Pesticide Goji Berry,Low Pesticide Goji,Low Pesticide Residue Wolfberry,Low Pesticide Dried Goji Berry
Ningxia Bairuiyuan International Trading Co.,Ltd , https://www.cngoji.com