Everyone in the process of using the ice machine will definitely encounter such problems or problems. So today, the Bab will share with you the symptoms of the common problems of the ice machine and how to solve them.
Ice machine problem symptoms and solutions:
1. Symptoms: Compressor works but does not make ice
Cause: The refrigerant leak or solenoid valve damage is not tight.
Maintenance: After leak detection, add trapping fluid or replace the solenoid valve.
2. Symptoms: The compressor has been working for cooling, the pump has been working for pumping, and the ice cubes are constantly thickening, but they can't enter the dehydration program to drop ice.
Cause: The fault of the water temperature probe is measured, so that the intelligent control system can not effectively sense the water temperature and work, misjudge the program error, or the controller fails.
Maintenance: Use a multimeter to measure the resistance of the water temperature probe. (When the water temperature in the water tank is close to 0 °C, unplug the three core wires in the control box and test the resistance of the two wires on both sides.) If the resistance is lower than 27K If the above is judged to be bad, it should be replaced. If the resistance is lower than 27K, disconnect any one of the two wires and adjust the resistance to 27K to 28K by means of series resistors. between.
3. Symptoms: The machine enters the de-icing process (the pump stops working and the compressor stops cooling) but the ice does not fall off.
Cause: The defrost solenoid valve is damaged.
Repair: Replace the solenoid valve or the outer coil.
4 Symptoms: The water shortage light is on but the machine does not automatically enter the water.
Cause: The pipe is not watery, or the inlet solenoid valve is faulty and the valve is not open.
Maintenance: Check the water inlet of the pipeline. If there is no water, turn on the waterway and restart. Replace the water inlet solenoid valve if it is faulty.
5 Symptoms: The compressor has work but the pump has not been working (no flow).
Cause: The pump is damaged or the internal fouling of the pump is blocked.
Repair: Clean the pump or replace the pump.
The above are some of the types of problems related to the symptoms and solutions of the ice machine. For more information, please contact us or click on the ice machine for more information.
In 2007, Shanghai Bayu () Industrial Co., Ltd. established an offline supply system for laboratory instruments, MRO industrial products, etc. In 2009, it officially launched an online procurement operation platform.
Bathroom Anti Slip Tape
Bathroom anti slip tape from Jerrytape is based on soft PEVA or PU material, which is environmentally friendly and skin friendly, people can walk on it without shoes. It`s coated with upgraded acrylic adhesive, has excellent waterproof ability and good adhesion. It can be used for many wet and smooth areas, even can be used under water, such as bathroom, bathtub, swimming pool, stairs, kitchens, gymnasiums, ship, etc. And it leaves no residue when removal, easy to clean. Compared to general anti slip tape, it is PVC free and sands free.
Product specifications:
Product name: Bathroom anti slip tape / PEVA anti slip tape
Colors: Clear, black, white, grey, also offer printing.
Sizes: 25mm / 50mm / 75mm / 100mm /150mm x 3m / 5m / 18m/ 25m. Also can customize almost any size according to your demand. Also can offer sheets, such as 20 x 380mm strips, 4" x 24", 4" x 32", 6" x 30", 6" x 32", 8" x 40" treads, which are very hot sell on Amazon. Also can be special shapes, such as round sheets, snow shape, S shape, etc.
Package: Shrink wrapped or OEM package, such as Shrink + round card, shrink + sleeve card, shrink + color box, etc.
Bathroom anti slip tape, PEVA anti slip tape, non slip treads, anti slip treads, shower anti slip tape
Kunshan Jieyudeng Intelligent Technology Co., Ltd. , https://www.jerrytape.com