The gradual popularization in production has led to the gradual improvement of production efficiency. The efficient production efficiency of the belt conveyor line products depends not only on high-quality equipment, but also on the effective management of equipment and manpower in the production. In the production management of belt conveyor line equipment, the management and handling of safety hazards is an important component. Shenzhen belt conveyor line equipment manufacturers here introduce the safety risks of eight belt conveyor line equipment.
1. The electrician must carry out safety warning signs on all key safety parts of the equipment. Equipment that lacks safety signs and safety shields is strictly prohibited.
2. During the operation of the belt conveyor line equipment, maintenance, maintenance, lubrication and fastening work shall not be carried out.
3. If any abnormal sound, maneuver or damage is found, it should be checked after shutdown and returned to the direct leader. It is not allowed to repair the operation without authorization.
4. Electrical and pneumatic equipment must be installed and repaired by an electrician. It is strictly forbidden to repair equipment with electricity. The electrical equipment should be well grounded and there must be no leakage.
5, the equipment is strictly prohibited "with disease" operation or overload operation, failure should be promptly eliminated. The operator finds that the equipment safety hazard should be immediately stopped and reported to the unit leader in time.
6. Belt conveyor line equipment is strictly prohibited to operate under low voltage or unstable voltage. If it is found that the rated voltage of the equipment is insufficient, it must be powered off immediately and fed back to the immediate leader.
7. In the course of work, if there is a power outage, the switch should be turned off immediately to prevent the device from running after the call.
8. The equipment must be suspended during maintenance: 'This equipment is under maintenance and is strictly prohibited. 'etc.
Effective management and timely handling of potential safety hazards in the production process of the equipment is a problem that enterprises must pay attention to. Finding problems and solving problems in time can effectively avoid possible failures in production and will not affect the normal production of the enterprise.
The Platewarmer uses minimum of energy due to the grid design of the heating element and provides a practical way to heat 3-12 plates in less time than it takes to cook a meal, leaving room in your oven for the cooking. To use the Plate Warmer, simply place up to 4 plates in each fold and switch on.
Electric Plate Warmers are thermostatically controlled to keep the plates at the ideal temperature to serve hot food whilst leaving the outer edges safe to handle and are a safe and easy alternative to heating up plates in the oven. The Electric Plate Warmer can be personalised with your own bespoke logo and/or design colour.
Below image as reference:
Electric Plate Warmer
Electric Plate Warmers, Electric Dish Warmer, Plate Warmers for Home, Electric Warming Plate
Ningbo Makeheat Electrical Appliance Co., Ltd , http://www.makeheat.net