What is the correct operation method for biomass steam generators?

Proper operation of biomass steam generator

The person in charge of the operation should carefully read the instruction manual of the equipment and be proficient in the knowledge and methods of safe operation. Check that the gas valve is open before each start, otherwise the burner will not work. Start the power control button on the control cabinet. At this time, the digital display window displays the current pressure in the furnace. The judgment of the high and low pressure refers to the boiler controller manual. After the burner is started, the fan is pre-purged for 30-50 seconds, then the gas valve is opened; that is, the flame is established. The start and stop of the burner is issued by the boiler controller according to the change of pressure. (This function is fully automatic.) The operator should always observe the change of pressure and stop it immediately and stop the fire if there is an abnormal phenomenon. During the operation of the steam generator, the operator should observe the water level at any time, especially to ensure that the water tank is full of water. The operator should regularly discharge the boiler to ensure the boiler water quality.