Master the key technology of mushroom, so that the spring mushroom mushroom

The fungus will open the bag of bacteria that will leave the mushroom and use the inoculation shovel or spoon to remove the bacteria floating on the surface of the material, smooth the surface and clean up the debris on the wall of the bag, straighten the bag mouth and outwards. The reverse folds the plastic film above the material surface by 1/2, and discharges the single layer on the ground or the bed frame, and sprays the fungicide once again. The top of the bag covered with newspaper or plastic film, keep bacteria for 3 to 5 days, the temperature of the mushrooming place is controlled at 8°C~16°C, and the relative humidity of the air is controlled at 85%~90%. Every day, water is sprayed on the cover and in the shed, on the ground, and it is ventilated 1 or 2 times a day for 30 to 50 minutes each time, and a certain amount of scattered light is given, prompting the fruit body to form as soon as possible. Zhuang Lei mushroom when the fruiting body grows to 1 ~ 2 cm, the mushroom room temperature is reduced to 5 °C ~ 8 °C, maintain a certain amount of ventilation and light, to promote the same neat mushroom bud neat, robust, which is commonly referred to Zhuang or antibacterial. The length of the buds depends on the temperature. If the temperature is low, the fruiting body grows slowly and has a large number and neatness, which usually takes 5 to 7 days. When the temperature is high, the buds have a short time, the number of buds is small and the uniformity is poor. When the fruiting body grows to about 5 centimeters, in order to obtain a good product with a long handle and a small cover, the carbon dioxide concentration can be appropriately increased. Paste the gap between the door and window of the mushroom house to reduce the air circulation, and simultaneously stretch and straighten the plastic film on both ends of the mushroom bag, increase the carbon dioxide concentration in the microclimate, suppress the opening of the mushroom cover, and accelerate the elongation of the stipe. However, the concentration of carbon dioxide in the mushroom house should not be too high, otherwise it will easily form a needle mushroom with a slim and sterile stem, which will seriously affect the yield and quality. After the growth inhibition period of the stalk is increased, the temperature is controlled between 8°C and 16°C and the relative humidity is between 90% and 95%. The plastic film covers the plastic film above the bag to adjust the carbon dioxide content of the bag. The light in the environment is dimmed as much as possible to promote the fruit body. The stipe grows quickly. As the fruiting body grows faster, the oxygen required increases. Sprinkle the cover every day with water spray and ventilate for 20-30 minutes. Occasionally when the outside temperature is high, the amount of water sprayed in the mushroom house is reduced and the humidity is lowered so as to avoid diseases caused by high temperature and high humidity, so that the internal physiological disorder of the mushroom body causes malformation and rotten mushrooms. The draft is provided by Han Chaozheng, Institute of Edible Fungi, Binhai County, Jiangsu Province, China. Tel: 0515-4103012 13851113822

China leading manufacturers and suppliers of Intramedullary Nail, Interlocking Intramedullary Nail, and we are specialize in Intramedullary Nails Orthopedic Implant,Telescopic Intramedullary Nail, etc.

Hangwei Orthopedics Medical is a specialty medical device company that develops and markets products primarily for the Orthopedics. Since 1997, more than 20 years experience behind us, Our company has a sound quality control system and advanced processing and testing equipment, with Germany DMG, the US HAAS 5-axis processing centers and other top brand processing machines. 

We are committed to providing highly quality orthopaedic products, like locking plates, non-locking plates, interlocking nails, magnetic guided intramedullary nails, spine internal fixation, external fixation system, minimally invasive traction frame, surgical power system and all kinds of instruments. 
Our patented innovative orthopedics solution and products and have very good acceptability in the market. 

We strive to provide superior benefits to professionals and patients through the development of reliable products.

Intramedullary Nail

Intramedullary Nail, Interlocking Intramedullary Nail,Intramedullary Nails Orthopedic Implant,Telescopic Intramedullary Nail

Shandong Hangwei Orthopedics Medcial Instrument Co., Ltd. , http://www.hangweimedical.com