1 . The lubricating oil in the gearbox and the grease in the rolling bearing inner cavity should be replaced regularly (generally no more than six months)
2 . If the coating pan is not used for a long time, it should be cleaned and oiled on the surface.
3 . The spray gun should be rinsed with clean water after each shift to prevent clogging. If the clogging occurs, please disassemble the spray gun according to the spray gun manual and use a fine needle to remove the muzzle residue.
4 . In order to ensure that the worm gear in the gearbox meets the lubrication conditions of the transmission, the temperature rise of the cabinet during operation shall not exceed 50 °C .
5 . The oil-proof seal on the shaft end of the worm should be checked and replaced regularly (not more than six months).
6 . The machine must be reliably grounded and its grounding resistance should be ≤ 4 Ω.
7 . Do not dismantle the appliance at will.
Flower Type LED Operating Lamp
The flower type surgical lamp is designed at 2016, when it was been pushed into the market, it has good echo from the customers, because the flower type surgical lamp outlook is different with normal round types lamps, its outlook is just like a flower, it is very beautiful , also can add beauty in the operation room, the flower type ot lamp change the normal condition for baldness operation room style, can make doctor and patients feel much difference; for the flower type surgery lamps specification, it is almost same as round type surgical lamp, in the first year, it also has good selling;
Flower type surgical lamp also has three types, ceiling types which include single dome, double dome , with camera or without camera; wall type and mobile type flower operation lamp;
LED Ot Lamp,LED Operation Lamp,LED Surgery Light,LED Surgical Light
Shandong Lewin Medical Equipment Co., Ltd. , https://www.lewinmed.com