There must be obstructions blocked, and the filter screen should be cleaned. When the ambient temperature is lower than 15 °C, the water droplets attached to the surface of the evaporator will freeze and the effect of the dehumidifier will be weakened. If the ambient temperature exceeds 40 °C, the pressure in the system will increase and the compressor will be overloaded. At this time, the overload protector The line should be cut off or the compressor motor will be damaged. Therefore, the dehumidifier is suitable for use in a temperature range of 15 ° C to 40 ° C. If the humidity in the air is less than 30%, it is too dry and uncomfortable, so the reliable humidity controller is controlled to maintain the range of 50% to 60%. When using, the doors and windows are closed as much as possible to achieve dehumidification in the room. The dehumidifying dryer should be placed flat and should not be tilted or sloping to avoid machine malfunction or abnormal noise.
If the water storage capacity in the dehumidifying dryer is too high, in order to avoid spilling the dirty ground, and you must carry the body during operation, please unplug the power cord and then drain the water in the water tank. After the dehumidifier has been moved for four to six hours, it will be turned on again. Because the compressor line in the dehumidifier contains cold coal, after moving, the cold coal must return to its original position after four to six hours. Clean the filter gas network (about once every two weeks) to maintain the dehumidification, dust removal efficiency and longevity of the machine. Clean the filter gas net to wash with water below 40 °C; use detergent to clean better, wash off the dust, rinse with water, dry it and put it back into the body. When cleaning the body, wipe it gently with a damp cloth; avoid direct splashing of water to avoid damage to electrical insulation. There are adhesives on the surface of the body, which can be washed with soapy water to avoid spraying with gasoline, petroleum spirit, solvent or spray insecticide to avoid peeling or discoloration. Do not use thin rods or wires to pry the inside of the machine to avoid malfunction or danger. When the power is off or not used for a long time, when you are traveling, please unplug the power cord to maintain the life of the machine.
NSD three machine integrated dehumidifying dryer
The dehumidifying dryer is composed of three parts: a honeycomb transfer type dehumidifying dryer, a heat insulating drying barrel and a suction machine.
The suction machine can transport the raw materials from the drying cylinder to the molding machine, and can also transport the raw materials from the storage drum to the drying cylinder, and can feed one raw material according to customers' needs.
It is transported to two molding machines, and a vacuum motor and a safety filter dust collector are installed inside the machine.
Depending on the needs of the different production: we can provide a powder-type optical grade suction machine to separate the powder from the raw material and capture it.
The device is compact in structure and is suitable for precision injection of connectors, precision gears, mobile communication, digital cameras and product size requirements.
The production of engineering plastic products; the moisture content of the raw materials after dehumidification and drying is low and stable, which can meet the strict technical and quality requirements.
The above content is provided by Dongguan Nigas Central Feeding System Manufacturer and Dehumidifying Dryer Manufacturer
Double Door Safe Box,Home Safe Box,Ammunition Safe Box,Gun Safe
Hebei Tiger Brand Group Jia Bao Cabinet Industry Co. LTD , https://www.cntigersafe.com