MRTD detection of infrared camera

MRTD detection of infrared camera

MRTD is an important parameter for evaluating the overall performance of thermal imaging systems.

Infrared imaging technology has been widely used in military and civilian applications. More sensitive and sophisticated infrared imaging systems put forward higher requirements for system performance testing. Test technology must adapt to the development of infrared technology, so the performance of infrared imaging system Evaluation and testing are becoming more and more important. At present, some countries in the world have proposed several models for evaluating the performance of infrared photoelectric systems, and established a set of laboratory measurement systems for the evaluation and testing of infrared imaging systems. Among the many performance parameters of the infrared thermal imaging system, since the MRTD reflects both the thermal sensitivity of the system and the spatial resolution of the system, it can be tested by both the manufacturer of the thermal imager and the thermal imager. User testing has therefore become the most important parameter for comprehensive evaluation of the performance of infrared imaging systems. As a subjective parameter, although MRTD seems simple, the fact that MRTD test is very difficult, because there are many easy mistakes in the measurement process, which will seriously reduce the repeatability and accuracy of the test results. Optikos' I-SITE system enables objective MRTD testing and NIST traceable calibration. Guangzhou Gurun is a domestic agent of Optikos and is able to provide customized equipment requirements.

MRTD observations are inconsistent among experienced personnel in different laboratories, with a difference of ±30% at f 0=1/2 DAS and ±50% at high frequency asymptotes. The judgment criteria for production inspection and product acceptance are not ideal. The analysis and research cause the repetitiveness and accuracy of MRTD test results. Finding the corresponding solution is an urgent problem to be solved.

The subjective measurement method of MRTD is a very time consuming process. The use of objective measures can reduce test time, but system parameters are determined by performing a large number of MRTD subjective measurements on the same type of camera before objective testing. This requirement makes the objective measurement of MRTD only advantageous when a large number of the same type of thermal imager needs to be tested. The objective measurement method is suitable for the thermal imager manufacturer. The MRTD objective measurement methods mainly include: MTF method, photometric method and image recognition method.

The subjective measurement of MRTD is usually measured by multiple observers (more than 3). The average of multiple measurements is theoretically possible to eliminate the differences in visual acuity and criteria of different testers. The experimental results show that multiple It is not uncommon for different test teams to have deviations of up to 50% from the MRTD measurements of the same camera. There are two main reasons for this result: 1 the difference in the level of the test group; 2 the test equipment used in the test, the judgment criteria, the observed environmental conditions and the differences in the test procedures.

At present, the test equipment structure of the infrared camera is as follows:

Figure 1. Variable target test system

Figure 2. Variable distance test system

Optikos' I-SITE system is structured as follows:

The following is the system framework of I-SITE configuration PMC-600

The PMC-600 is a camera that calibrates to the eye response with NIST traceable calibration. It can simulate the human eye for MRTD detection. Other subjective tests, including MRC, MDTD, and MDC, can be detected quickly and without difference.

Using the appropriate target source and target, the I-SITE system can also be tested in low-light image tubes and night vision systems.

Biotechnology

Biotechnology,Tebuthiuron,Trifloxystrobin,Flufenacet,Amicarbazone,Prothioconazole,Sulfentrazone

Changzhou Satidi Import and Export Co., Ltd. , https://www.guanjiejts.com