1. Leakage phenomenon
Because of the time problem, or for the reason of operation, there is a liquid leakage when the fluorine-filled centrifugal pump pumps the liquid. These conditions may be caused by the wear of the machine seal (mechanical seal), resulting in uneven surface of the machine seal and leakage. In addition, it may be that the melancholy is not properly operated, causing the pump cover to burn out.
2, pump body shaft steering problem
The opening mechanism checks the steering of the pump according to the steering sign. If the steering problem is not noticed in the proofreading project, the impeller can easily fall in the opposite direction.
3, wear phenomenon
When the fluorine-filled centrifugal pump is installed, it will be cautiously operated to prevent tools and debris from falling into the pump body. If there are impurities, it will have a serious impact on the machine seal, which will lead to the actual leakage.
4, noise or warming
During the use process, always pay attention to the pump body and motor of the fluoroplastic centrifugal pump to see if there is noise or temperature rise. So as not to cause danger during use.
5, can not afford liquid
In the installation process, it should be noted that the installation height should not exceed the NPSH requirements of the fluorine-filled centrifugal pump.
Freeze Dried Food,Freeze Drying Sea Shrimp,Food Hyaluronic Acid Powder,Freeze Dried Carrot Powder
Ningbo Nutrition Food Technology Co.,ltd. , https://www.collagenworkshop.com