Main use: This model is composed of container, spiral stirring blade and transmission parts; spiral blade is generally made of double or triple layer, outer layer spiral gathers both sides of material to the center, and inner layer spiral conveys material from center to side Form a convection mix.
The mixer cylinder has a U-shaped long body structure, which ensures small resistance movement of the mixed material (powder, semi-fluid) in the cylinder. A double spiral blade is arranged on the drive main shaft, and the inner spiral belt conveys the material to the outside, and the outer spiral belt gathers the material to the inside. The material forms a low-dynamic and efficient mixing environment under the convective movement of the double-layer ribbon. The inner and outer diameter spirals mounted on the stirring shaft drive the material in the European common body, so that the agitator can turn the animal material in a large range in the cylinder. When the stirring device is working, the inner spiral rotates the material near the axial center to rotate the shaft, and the axial direction is pushed from the inside to the both sides. The outer spiral drives the material near the wall to rotate the shaft, and the axial direction is pushed from both sides to the inside. Can be mixed evenly in a short time.
Bottom discharge mode: The powder material adopts the pneumatic large opening door structure, which has the advantages of quick discharge and no residual; high-fine material or semi-fluid material adopts manual butterfly valve or pneumatic butterfly valve, manual butterfly valve is economical, and pneumatic butterfly valve is semi-fluid The sealing is good, but the cost is higher than the manual butterfly valve. The jacket can be configured where heating or cooling is required. The heating method has two modes: electric heating and heat conduction oil heating: electric heating is convenient, but the heating rate is slow, and the energy consumption is high; the heat conducting oil heating needs to be configured with the oil pan and the oil guiding power and the pipeline. The investment is large, but the heating rate is fast and the energy consumption is low. The cooling process can directly inject cooling water into the jacket, and the jacket has a large heat exchange area and a fast cooling rate. The motor and the stirring spindle are directly connected by a cycloidal pinwheel reducer, and the structure is simple, the operation reliability is high, and the maintenance is convenient.
working principle:
The ribbon mixer is generally used for the mixing of viscous or cohesive powders and the mixing of liquid or paste materials in the powder. At the same time, due to the difficulty of cleaning the viscous materials, it is suitable for occasions where the output is large and the varieties are not frequently changed. mixing.
Adult diapers are disposable urinary incontinence products, one of the adult care products, and a disposable diaper mainly suitable for incontinent adults.
Most products are flaky and shorts type. Use adhesive sheets to connect into a pair of shorts. The adhesive sheet also has the function of adjusting the waist size so as to fit different fat and thin body shapes.
Generally, the structure of diapers is divided into three layers from the inside to the outside. The inner layer is close to the skin and made of non-woven fabric; the middle layer is water-absorbent fluff pulp, added with polymer water-absorbing agent; the outer layer is an impermeable breathable film.
Adult Diapers Cvs,Adult Underwear,Adult Diapers Amazon,Adult Diapers For Women
Shandong Kangshun Daily Products Co., Ltd , https://www.centurybenifit.com